T1 First Wave Bibjohn
Click on the smaller images to view as large.
Click on large image to view close-up.
The two-piece design of the T1 Wetsuits offer more comfort and less restriction. Because the top and bottom are not attached, you have much more freedom of movement and there is no “torso-rubber stretch” or shoulder fatigue that occurs with one-piece wetsuits. All T1 models are sold as separates for a more customized and personal fit. With up to seven sizes of tops and bottoms, you have 49 possible size combinations from which to choose. Other features we innovated many years ago include lower necklines and thicker rubber in the legs and hips to help float the largest bones and muscles in the body. More floatation here means more speed. T1 Wetsuits are not filled with gimmicks, just physics.
The First Wave is simply the best wetsuit in the world and we challenge it against any other more expensive brands to the test. Our high-end suit is lined with 4-way stretch Nylon Lycra® to minimize chafing. All seams are glued and blind-stitched, making them stronger than the rubber itself. All wetsuit models feature sleek graphics and are sold as separates for a more customized fit.
The Bibjohn is 5mm thick from the oval ankle openings up to the crotch and up the sides of the hips. From that seam up, the Bibjohn is 2mm thick. This includes the midsection around the stomach, low back, as well as the bib straps that extent up the spine in back and up the chest in front. It is designed like this so that when you wear any of our T1 tops, the total rubber thickness remains less than 5mm thick, so you have all the needed flexibility, while keeping your spine and vital organs warm, thus keeping you toasty warm. The total thickness also adheres to all rulings from all national and international governing organizations that limit the maximum wetsuit thickness to 5mm.
Please check your size in Product FAQs.
- Stretchy 5mm thickness to the hips floats the legs and hips more than any other wetsuit.
- 2mm Bib straps go over the trapezius (base of neck), so no limited reach, no tired shoulders, and faster swim times.
- GreenGoma™ #9 Rubber with Super Composite Skin rubber makes the First Wave the warmest, fastest, most durable, flexible, and buoyant, and the most comfortable wetsuit in the world today.
- Chlorine resistant treatment, but not recommend for repeated use in chlorinated water.
- Eliptical leg openings for faster and easier removal, longer seam tape for self-customizing leg length, and lower profile Bibjohn straps with soft Lycra trim.
All T1 Wetsuits are made of GreenGoma™ a limestone rubber…bye-bye petroleum wetsuits
Until recently all triathlon wetsuits have been made of petroleum. First in the industry to introduce limestone rubber into our wetsuits, all T1 Wetsuits incorporate this amazing GreenGoma™ technology.
So what does this all mean to you?
GreenGoma™ rubber offers better stretch, buoyancy, durability, and insulation with a more closed-cell injected construction thus making it 98.9% water impermeable. So it is lighter, it dries quicker, and lasts longer. The only part of the rubber that gets wet is the new stretch liner that is now made of recycled post consumer products.
So is this rubber environmentally friendly? Is it a “green” wetsuit?
We have seamlessly replaced one rubber with another that is better, more buoyant, helps you swim faster, and lasts longer. If nothing else were to change, you will have a better-performing product with less detriment to the environment, which is always our goal.
Please allow us to be perfectly upfront. There are a handful of companies that are manufacturing wetsuits out of limestone rubber and then marketing them as environmentally-friendly. Currently, wetsuit rubber is either made of petroleum, which begins with oil exploration and drilling, or, in the alternative, made of limestone, which begins with mining. Both petroleum and limestone have taken hundreds of thousands of years to produce and both are nonrenewable resources; both are in limited supply on our earth, require heat, and create pollution and waste to refine into a finished product. So for one to claim that a limestone wetsuit is “green” is just not true, at least not yet.
It is apparent in light of the recent oil spill in the Gulf of Mexico, that limestone is cleaner when one considers the risk of environmental disasters. The factory that makes our GreenGoma™ uses much less heat to refine it as compared to its petroleum counterpart. This is a step in the right direction.
In order for us to step away from limestone in the future, we need to first step away from petroleum and look for other “greener” options. The idea of trying to create a green wetsuit has inspired us to change to recycled internal fabrics with no VOC (Volatile Organic Compounds) dyes. The use of non-toxic laminates and adhesives during the assembly process are additional steps in our goal. We are getting closer to finding water-based adhesives that are stronger and more flexible. Finally we are working with YKK on developing a wetsuit zipper made of recycled materials.
As for recyclability and sustainability, no wetsuit rubber in the world is recyclable. Yes, old triathlon wetsuits can and should be re-used for other sports, or can be cut up and used as potholders, used for insulation and even be turned into beer and soft drink koozies. For now, the most obvious form of sustainability is simply that we have created a wetsuit that will last longer, so you will not have to replace it as soon.
Before any of us can swim 2.4 miles, we first need to get across the length of a pool. When it comes to making a greener wetsuit, we are the first to dive in!